![]() |
Хочу заменить усь Rainbow iPaul DM2000
Хочу заменить Rainbow iPaul DM2000. Есть вариант VELAS VC-1108D что вы скажете и такой еще вопрос немогу найти инструкцию на Rainbow iPaul DM2000 можно ли его подключить в мостовом режиме чтоб поднять мощность?
http://www.youtube.com/watch?v=-EWhO...layer_embedded |
Rainbow: iPaul DM2000 - 1 channel Amplifier
SPECIFICATION: Peak Power Output: 2000 Watts into one channel 1 x 1000 Watt RMS @ 1 Ohm or, 1 x 730 Watt RMS @ 2 Ohm or, 1 x 360 Watt RMS @4 Ohm Frequency Response -3dB: 10 Hz - 250 Hz 24 dB Low-Pass: 50 Hz - 250 Hz 24 dB Subsonic Filter: 15 Hz - 50 Hz Bass Boost: 45Hz, up to +12dB switchable Phase Shifter 0° to 180° Gain and Phase control via Remote control with 5m cable (included) Total Harmonic Distortion: < 0.04 % @ 1W / 4 Ohm Damping Factor: > 160 at 4Ohms Operating voltage: 11V - 16V Max input power/Peak current admission: 90A/155A Efficiency: 85% with 14.4 DVC Short circuit protection/Overloading: Immediate switch off Connector for external fan module (optional) Connector for temperature-sense and display module (optional) Connector for peak power doubling module (optional) Dimensions: WxHxD: 415mm x 60mm x 250mm Weight: 5.5kg Integrated falt fuses 2 x 25A 4-gauge power & earth input MAIN FEATURES Digital output amplifier (CLASS D) with integrated high-current MOSFET-switch power supply Double output terminal for dual voice subwoofer, 1Ohm stable Preamplifier with very low noise Additional preamplifier output with LINEOUT Reversible safety switch-off with thermal monitoring Safety switch-off with DC current to loudspeakers Safety switch-off for loudspeaker short-circuit and loudspeaker under impedance Softstart remote muting for suppression of switch-on peaks Low power requirements for remote-muting electrical circuits High-tech semi-SMD built structure with low coupling conductive wiring Palladium-plated 25 mmІ power and 10 mmІ loudspeaker connection Interference-proof certified by European E-Norm |
Спб.! но это я смотрел это Характеристики, а у меня нет инструкции, тут есть подключение мостом двух усилителей, но я ненаю можно ли подключить саб мостом, на уси у меня есть два входа как на двух канальном уси [+ -] [+ -] подключено у меня щас
[+ -], а я подумываю [+] [-] вот так. |
Это моноблок и канал там один.А две пары колодок для удобства-или пару дохлых сабов прицепить,или двухкатушечний.Ну с учетом сопротивления конечно.У многих моделей так.
|
Цитата:
Но что-то мне подсказывает, что не стоит... |
Цитата:
|
если под давление то велас переплюнит данный рейнбоу как мальца.....
Страдивари с такого веласа при норм. питании снимали 1,7 кВт ..... и вроди бы на замер в 0,5 Ома пускали........ вот только где ты этот велик найдёш....???? :) |
Текущее время: 22:05. Часовой пояс GMT +2. |
Перевод: zCarot
autozvuk.org ©